Ferguson FK-7900 UCI User Manual

User manual FK-Series English

108. Connection Diagram The following figure shows cable connections required for TV and other related electrical equipment. If you need any assistan

11 8.3 Connect SCART Port 1. Connect the antenna with LNB IN of the STB. 2. Connect to TV as following figure. 8.4 Connect Audio System 1. Connect t

128.5 Connect USB Port 1. The receiver supports any hard disk placed in a housing with its own power. The only condition is that assumption on the di

13 8.7 Connect to an other STB 1. Connect to an STB as following figure.

148.8 Setting motorized satellite dish Proper work of Ferguson receiver ensures motorized system by USALS company Stab. To connect the installation

15 FIRST STEPS 1. Insert the plugs of the receiver’s and the auxiliary equipments in the power socket and switch them on. 2. Select the AV channel on

16THE MENU INFORMATION Press MENU key on the RCU to display the following menu on the non-menu mode. The menu consist of 6 sub-menus such as the foll

17 1.4.1 DiSEqC1.2 Satellite: Make a choice from the pre-programmed satellites. Transponder: Select the desired TP under the current satellite. Limit

181.6 Single Search The function is used to search channels in one satellite, which has been selected. Press red key to enter the search window. Firs

19 2.1 Parental Control The STB provides an active parental lock function, allowing you to block specific menu settings by means of a four-digit

2WARNING !!! On the USB Memory Function for FK-x900 series model, user can make recording or playing function using by external USB de

204.2 Delete Channel To delete a service: 1. Select the channel you want to delete and press GREEN key to confirm. 2. After pressing G

21 4.6 Save/Restore This option allows you to save or restore the channel list. receiver > USB: This feature allows you to save the cu

225.3 System Information This menu displays some information of the receiver. 5.4 Factory Default Enter the menu with four-digit number password (b

23 7.2 USB/PVR key This option is available only if external USB memory was properly connected! MP3: this option provides simple audio file

247.4 EPG The receiver provides EPG function for you to get access to the TV Guide (or Radio Guide if you are listening to radio channel) that will s

25 7.7 Quick Find After pressing BULE key, the Quick Find window will be displayed. Select the first letter of the channel name which you w

26 TROUBLE SHOOTING In worry about customer's satisfaction, in case of any problems, we ask you always before dispatch device t

27 GLOSSARY CA - Conditional Access - Encryption system used to secure content and grant access only to subscribers. CAM - conditional access mo

SPECIFICATION TUNER Input Frequency 950 ~ 2150 MHz Loop Out Frequency 950 ~ 2150 MHz Input Level –65 ~ –25 dBm Input Impedance 75Ω LNB Supply 13V/18V

3 SAFETY INSTRUCTIONS... 4 SOFTWARE

4SAFETY INSTRUCTIONS Please observe all warnings and instructions on the equipment and contained in these operating instructions. You mu

5 SYMBOLS USED ON THE RECEIVER The Digital Video Broadcasting logo. This logo tells you that this receiver is compliant with the DVB standards. Th

6GENERAL INFORMATION This digital satellite receiver is a highly cost-effective digital satellite receiver integrated. It provides big channels stora

7 4. Remote Control Unit RCU-500 Due to standardization fact most of Ferguson units is using the same remote control unit RCU-500. That is why NOT al

85. Front Panel POWER : Turns the receiver ON/OFF CH : Changes the channels on the screen and moves the cursor up/down in the Menu

9 6. Rear Panel LNB IN: Connect to satellite antenna (IF input from LNB to digital tuner) LOOP OUT: Connect to another receiver (IF